BH FITNESS T1 BASIC Guide de l'utilisateur télécharger pdf (Page 10)

Step 1 - Power Emulator Troubleshooting

•

List of Emulators User Guide

USB510JTAGEmulator(BH‐USB‐510)

This model has a single Bi-Color LED. When powered the LED will be illuminate solid Red then

change into Green.

Figure 3 BH-USB-510 Power LED

PASS/FAIL

If the power indicator is illuminated, go to the next step.

Verify that the USB cable is firmly inserted into the motherboard, or switch USB ports the cable is

connected to. Otherwise report this information (step that failed) to Blackhawk support and be

sure to include the unit’s model and serial number. There is no reason to continue with these

procedures.

USB510LJTAGEmulator(BH‐USB‐510L)

This model has a single Bi-Color LED. When powered the LED will Flash Green, when connected

to a target it will be illuminate solid Green.

Figure 4 USB510L Power LED

PASS/FAIL

If the power indicator is illuminated, go to the next step.

Verify that the USB cable is firmly inserted into the motherboard, or switch USB ports the cable is

connected to. Otherwise report this information (step that failed) to Blackhawk support and be

sure to include the unit’s model and serial number. There is no reason to continue with these

procedures.

USB560JTAGEmulator(BH‐USB‐560)

This model does not have an LED. Continue to Step 2 - Enumeration.

Power LED

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 66 67

Pas de commentaire

BH FITNESS T1 BASIC Guide de l'utilisateur Page 10